Step 0: The Proxmox-NUT HomeLab HowTo: Introduction The series includes this article, a 7-part video series, and a VMWare archive. In this HowTo, I cover the following steps: Configure a VM on VMWare Workstation Pro to install Proxmox on it; Install a Windows Server 2022 VM as a VM in Proxmox; Install the NUT (Network UPS Tools) UPS Software. I also configure Proxmox, Windows Server 2022, and NUT to use a Gmail SMTP relay. This will be used by Proxmox and Windows server to send emails when they start and stop. Proxmox and NUT will provide additional status information. Windows Server is configured to start automatically when Proxmox starts and will shut down cleanly without manual intervention when Proxmox is shutdown or rebooted. Every stage is tested out to verify that everything is working as expected. Any limitations are highlighted. A snapshot of the VM state after every Step is taken. You can download the entire archive and run it on your own hardware. If you decide yo
This comment has been removed by a blog administrator.
ReplyDelete