Introduction This project describes how I synchronise my LogSeq folder on GitHub on Android devices. I wanted to be able to work on topics in LoqSeq on my Android devices besides my PCs. Most of the screen shots and references relate to LogSeq, but you can adjust them to your needs. The solution described here is one in which the synchonization with the repository will be manual. In this scenario, one would synchronise with the repo before opening the tool (LogSeq in my case) and update the repo again when you're done. The Steps ( skip if you want to jump directly to the actions ) This tutorial describes how to install Termux on an Android device. Termux is an open-source Android terminal emulator and Linux environment application. After Termux is updated and running, a folder on the Android device is mapped to Termux. GitHub is installed, and the repo is cloned to this folder. The Termux folder used for the repo has to be refle...
Introduction This guide covers how to install Plex Media Server (PMS) on a lower-powered Ubuntu Server. As a long-time Plex Pass user, I created a video titled HOWTO Setup a Plex Media Server (PMS) Appliance back in 2020. While that computer (a laptop, actually) had been running flawlessly, I decided to replace it with a virtualised setup. As part of the upgrade process, I chose to start from the very beginning and document each action I performed. I also wanted to make this tutorial beginner-friendly, allowing anyone to follow along and replicate the steps I describe here.
Comments
Post a Comment